Home > Windows 7 > Windows 7 Vpn Error Codes

Windows 7 Vpn Error Codes

ERROR_MACRO_NOT_DEFINED 654 A command or response in the device .INF file section refers to an undefined macro. Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate. If you know the IP address of VPN server, try connecting with that. ii. Source

The root certificate to validate the RAS server certificate is not present on the client. The LAN connection selected as the private network has more than one IP address configured. Note By default, 128 ports are available for this device. Note  Deprecated in Windows Vista and later versions of Windows.   ERROR_INVALID_SMM 745 The Session Management Module (SMM) is not valid. https://technet.microsoft.com/en-us/library/ee623985(v=ws.10).aspx

A pre-shared key is used to guarantee you are who you say you are in an IP Security (IPSec) communication cycle. Note  Supported in Windows Vista and later versions of Windows.   ERROR_RASQEC_TIMEOUT 822 The Network Access Protection (NAP) enforcement client did not respond. Modify the number that appears in the Maximum ports list, as appropriate for your requirements, and then click OK. Possible Solution: Please contact your VPN server administrator to verify and fix the above issue - for further details refer to this blog. 11) Error Code: 0x800704C9 Error Description: Possible Cause:

ERROR_WRONG_INFO_SPECIFIED 604 The port information specified is incorrect. For further details refer to this blog. Please see the System Event Log for the detailed information. 849 The PEAP inner method attributes stored in the cookie is invalid 850 The Extensible Authentication Protocol type required for authentication Rectifying this problem requires identifying which VPN protocols the server can support and installing a matching one on the client via Windows Control Panel.

Note  Deprecated in Windows Vista and later versions of Windows.   ERROR_REQUEST_TIMEOUT 638 The request has timed out. Error Codes The following list contains the Error Codes that you may receive when you try to make a dial-up connection or a VPN connection:   Error Description 600 An operation ERRERROR_INVALID_COMPRESSION_SPECIFIED 613 The specified compression is not valid. Finally, the local router may be incompatible with the type of VPN being used and require a router firmware update.

Please install and enable the Ethernet adapter on your computer via the Network Connections folder before attempting this connection. 815 The broadband network connection could not be established on your computer ERROR_NOT_ROUTER_PORT 914 A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only. If the problem persists, disconnect and retry the remote access connection or contact the administrator for the remote access server. 820 The Network Access Protection (NAP) enforcement client failed to register Some network services or resources might not be available.

ERROR_PORT_DISCONNECTED 619 The specified port is disconnected. http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/error-code-800-for-the-vpn-connection-using/115a4798-8ee6-47e4-baff-4f1659d32d21 Return code/valueDescription PENDING 600 An operation is pending. Possible Cause: This error usually comes when their is no valid machine certificate on your client machine. Possible Solution: Make sure the correct machine certificate for L2TP validation is installed on your client machine - for further details refer to this blog. 7) Error Code: 691 Error Description:

This means that the CRL server is available to the client over the Internet because the client computer runs the CRL check during the establishment of the SSL connection and the Possible Causes: One of the prime causes for the above error is: when the *only* allowed authentication protocol configured on VPN server (or Radius server) is MS-CHAP and the VPN client A ‘Diagnostic’ button is shown on the Error page of the VPN connection. Is this page helpful?

ERROR_OAKLEY_NO_POLICY 791 The L2TP connection attempt failed because security policy for the connection was not found. ERROR_ALREADY_CONNECTING 910 This interface is already in the process of connecting. ERROR_ALLOWED_PORT_TYPE_RESTRICTION 941 You do not have permission to connect using the current device type. http://introbuilder.net/windows-7/windows-vista-backup-error-codes.php Possible Cause: This error comes when the server machine certificate binding to HTTPS is not done on the VPN server OR the server machine certificate is not installed on the VPN

Note  Supported in Windows 7 and later versions of Windows.   ERROR_MOBIKE_DISABLED 843 Mobility is disabled for this connection. We appreciate your feedback. ERROR_READING_MAXCONNECTBPS 674 The system was unable to read the maximum carrier connection speed from the media .INI file.

ERROR_NO_CONNECTION 668 The connection was dropped.

ERROR_USER_DISCONNECTION 631 The specified port was disconnected by the user. List of Error Codes that you may receive when you try to make a dial-up connection or a VPN connection in Windows 7 Updated: December 3, 2009Applies To: Windows 7 This If all of the settings are correct Windows will confirm a successful connection and add it to your list of ‘Dial up and VPN' connections within the ‘Network and Sharing Center'. This is typically caused by a pre-shared key problem between the client and server.

ERROR_CANNOT_LOAD_STRING 626 A string could not be loaded. Some network services or resources might not be available. ERROR_ASYNC_REQUEST_PENDING 616 An asynchronous request is pending. Expand the server, right-click Ports, and then click Properties.

This could be because one or more fields of the certificate presented by the remote server could not be validated as belonging to the target destination. 836 The Network Access Protection ERROR_REMOTE_NO_DIALIN_PERMISSION 920 The remote account does not have Remote Access permission. This could be because one or more fields of the certificate presented by the remote server could not be validated as belonging to the target destination. Cheers, Dinesh Agarwal Amit Kumar (WINDOWS) Windows Networking [This posting is provided "AS IS" with no warranties, and confers no rights.] Tags Troubleshooting Comments (2) Cancel reply Name * Email *